Your Siding Experts in Portland, OR

Siding repair and replacement for Portland-area homes, from rotted trim and leaking roof corners to a full re-side in fiber cement, vinyl or cedar. Enter the ZIP code of the house for a free quote.

Start My Siding Quote

No cost and no obligation. Tell us about the house and the siding problem to get started.

Overview

Looking for siding contractors in Portland, Oregon? Most siding jobs here start with one question: is the damage on one wall, or on every wall? The answer decides whether you need a repair or a full re-side, and it is worth knowing before anyone quotes the work.

This page covers how to tell the two apart, the failures that show up most on Portland-area houses, the materials worth considering for a new wall, when a permit or historic review is involved, and what the published cost figures say. To price your own house, enter its ZIP code above; the quote is free and comes with no obligation.

Repair or replacement: which one is your house?

Most siding calls in this climate come down to water. Portland averages about 37 inches of rain a year (NOAA climate normals for Portland International Airport), and most of it falls between November and January, so any spot where siding holds water stays wet for months at a time.

  • One wall, a few boards, a single leak. That is usually a siding repair: cut out the damaged boards, fix the flashing that let water in, weave in matches, prime and paint.
  • The same failure on several walls. Swollen hardboard, delaminating T1-11 or rot that keeps turning up points toward a full siding replacement, with the house wrap and flashing rebuilt behind it.
  • An older house with original wood. Pre-1940 lap and shingle siding is often worth saving board by board. See historic wood siding repair.

What goes wrong with siding around Portland?

Four problems account for a large share of what homeowners notice first. Each has its own page, and the common siding problems overview puts them side by side:

  1. Dry rot in boards, corner trim and window sills, where caulk and paint have failed. The dry rot guide maps the ten places it usually starts on a Portland house.
  2. T1-11 panels coming apart at the bottom edge and at horizontal seams.
  3. Swollen hardboard or Masonite siding, typical of houses sided in the 1980s and 1990s.
  4. Water behind the siding at roof-to-wall corners and windows, which does its damage out of sight.

Choosing a new siding material

If the old siding is coming off, the replacement is usually one of four materials. Fiber cement, with James Hardie the best-known brand, is the material most Portland-area siding contractors feature first. Vinyl costs less and needs no paint, but it has to be hung loose enough to move with the heat. Cedar suits older and craftsman-style houses and needs a finish kept up. Engineered wood such as LP SmartSide is priced between them and is covered on the replacement page. All six kinds of work are summarised on the siding services page.

When is a permit or historic review involved?

Often not. Portland Permitting & Development does not require a building permit to repair or replace siding that is not required to be fire-resistant. The exceptions matter, though: walls within 3 feet of a property line are generally fire-rated, and in the City’s Historic and Conservation Districts, replacing siding needs historic resource review even when new wood replaces old wood. The Portland page covers both, and Lake Oswego, Oregon City and Gresham each have their own rules.

Where do the cost figures come from?

The siding cost page lists published ranges, each with its source and the date it was checked: per-square-foot figures for fiber cement, vinyl, cedar, engineered wood and T1-11, Portland repair ranges, and a regional average for a full 1,250-square-foot re-side. Use them to sanity-check a quote, not to replace one; only a contractor who has seen the walls can price the job.

Guides for Portland homeowners

The resources section goes further than a service page can. Start with what dry rot is and where it hides on a house, how long each siding material lasts and what its warranty actually covers, and a siding inspection checklist to walk through before the November rains. If you are weighing bids, how to compare siding quotes in Oregon covers the contract, the license check and the notices Oregon law requires.

Areas served

Portland and the Oregon-side cities around it in Multnomah, Washington and Clackamas counties, from Hillsboro and Beaverton to Gresham, Lake Oswego and Oregon City. The service areas page lists every city. Vancouver and the rest of Clark County, Washington are not covered. For anything else, the contact page has an email address.

Services

What we can help with

Common signs

Signs it is time to call someone

  1. Soft, crumbly boards, sills or corner trim

    Despite the name, dry rot is fungal decay in wood that stays wet: behind failed caulk, along the tops of trim with no drip cap, and where boards sit close to soil, decks or roofing. Portland averages about 37 inches of rain a year, most of it from November to January, so the same spots stay damp for months.

  2. T1-11 panels delaminating along the lower edge

    T1-11 is plywood with vertical grooves, and it lets water in through its edges: the bottom cut edge near grade, horizontal joints that lack Z-flashing, and panel corners at windows. The veneers then separate and the panel softens from the edge inward.

  3. Lap boards swollen and mushroomed at the lower edge

    Hardboard siding, much of it sold under the Masonite name, and LP Inner-Seal OSB siding are wood-fiber boards that swell once water gets past the paint at edges and nail holes. Both were installed widely in the 1980s and 1990s, and both class-action settlements have long since closed to claims.

  4. Stains or soft wall below a roof corner or window

    Siding sheds most rain, and the layers behind it deal with the rest. Water gets past them where a roof edge dies into a wall without a kickout flashing, where house wrap is torn or lapped the wrong way, and where windows were set without head or sill flashing.

  5. Vinyl panels rippled, bowed, cracked or melted

    Vinyl moves with temperature, so it is meant to hang loosely on its nails with room to slide at corner posts and J-channel. Panels nailed tight or butted hard into trim buckle when they heat up, and sunlight concentrated by a neighbour's low-emissivity window glass can soften them.

  6. Boards cracked or knocked loose in a winter storm

    Portland-area winter storms bring down trees and limbs onto houses: the February 2021 ice storm left about 420,000 PGE customers without power, the largest outage in the utility's history. A broken section of siding exposes the wrap and sheathing behind it, so it needs closing up before the next rain.

  7. Paint peeling off the same boards after every repaint

    When paint lets go on the same boards every time, the usual causes are moisture pushing out from a wet wall behind it, or bare end grain and unprimed replacement boards underneath. If the house predates 1978, the scraping itself disturbs paint that may contain lead.

Costs

What this typically costs

WorkTypical rangeBasisSource
Fiber cement siding replacementAn average across the report's West Coast markets, not a Portland quote. Factory-primed boards, painted.$22,555per job, 1,250 sq ft of wall including trim (regional average)Remodeling 2025 Cost vs. Value Report (www.costvsvalue.com), Pacific region. © 2025 Zonda Media, a Delaware Corporation. Complete data from the Remodeling 2025 Cost vs. Value Report can be downloaded free at www.costvsvalue.com.checked September 27, 2026
Vinyl siding replacementSame report and house size as the fiber cement row, so the two compare like for like.$18,507per job, 1,250 sq ft of wall including trim (regional average)Remodeling 2025 Cost vs. Value Report (www.costvsvalue.com), Pacific region. © 2025 Zonda Media, a Delaware Corporation. Complete data from the Remodeling 2025 Cost vs. Value Report can be downloaded free at www.costvsvalue.com.checked September 27, 2026
Fiber cement siding, installedBoard style, trim detail and whether the boards come prefinished move a job along this range.$9 - $16per sq ft of wall, PortlandAngi, cost guide for replacing vinyl or fiber cement siding in Portland, OR (updated February 25, 2026).checked September 27, 2026
Engineered wood siding (such as LP SmartSide), installed$7 - $12per sq ft of wall, nationalHomeGuide, house siding cost guide (updated October 29, 2025).checked September 27, 2026
Cedar siding, installedBevel boards sit toward the low end; shingles and clear, knot-free grades toward the high end.$6 - $16per sq ft of wall, nationalHomeGuide, house siding cost guide (updated October 29, 2025).checked September 27, 2026
Vinyl siding, installed$3 - $12per sq ft of siding, nationalFixr, siding replacement cost guide (updated January 23, 2026).checked September 27, 2026
T1-11 panel siding, installed$250 - $700per square (100 sq ft of wall), nationalAngi, T1-11 siding cost guide (updated March 18, 2026): $2.50 to $7.00 per sq ft.checked September 27, 2026
Siding repairA typical range for one repair visit; rot that reaches the sheathing takes a job past it.$903 - $2,835per repair job, PortlandAngi, siding repair cost guide for Portland, OR (updated August 4, 2026).checked September 27, 2026
Fiber cement siding repair$3 - $11per sq ft repaired, PortlandAngi, siding repair cost guide for Portland, OR (updated August 4, 2026).checked September 27, 2026
Old siding tear-off and disposalCheck whether a replacement quote includes it. Lead-safe removal on a pre-1978 house adds to it.$70 - $200per square (100 sq ft of wall), nationalHomeGuide, house siding cost guide (updated October 29, 2025): $0.70 to $2.00 per sq ft.checked September 27, 2026

Start My Siding Quote

No cost and no obligation. Tell us about the house and the siding problem to get started.

Questions, answered

Common questions

What makes one siding job cost more than another?

Mostly the wall area and how high it goes, the material, whether the old siding comes off and is hauled away, and what turns up behind it: rotted sheathing is priced once the wall is open. Trim, flashing, paint and lead-safe work on a pre-1978 house add to it. The siding cost page lists published ranges for each material, and shows where every figure came from and when it was last checked.

What is the best time of year to re-side a Portland house?

Summer. NOAA's 1991-2020 normals give Portland International Airport about half an inch of rain in each of July and August, while November, December and January each bring more than five. Crews do hang siding in the wet months, covering the walls as they go, but the USDA Wood Handbook warns that painting wood wetter than 20 percent moisture raises the risk of blistering and peeling, so finish work goes best in the dry months.

When does Portland require a permit or review for siding?

Usually not for the siding itself. Portland does not require a building permit to repair or replace siding that is not required to be fire-resistant. Two common exceptions: walls less than 3 feet from a property line are generally fire-rated, and houses in a City Historic or Conservation District need historic resource review to replace siding, even with the same material.

How do I know whether to repair or re-side?

Repair makes sense when the damage stays on one wall or a few boards, the sheathing behind is solid, and the siding is still made or can be matched. Replacement is worth pricing when the same failure shows up on several walls, the product is discontinued hardboard or T1-11, or the wall behind is soft in more than one place.

Which areas does Portland Siding Pros cover?

Houses on the Oregon side of the Portland metro: Portland and the Multnomah, Washington and Clackamas County cities around it, from Hillsboro and Forest Grove to Gresham, Troutdale and Oregon City. Vancouver and the rest of Clark County, Washington are not covered, because a Washington job needs a Washington-registered contractor.

Where can I look up an Oregon siding contractor's license?

Search the contractor's name or license number on the Oregon Construction Contractors Board website (search.ccb.state.or.us). It shows whether the license is active, the bond and insurance on file, and any complaint history. On a house built before 1978, also ask whether they hold the CCB lead-based paint renovation license.

A free siding quote request

Start My Siding Quote

No cost and no obligation. Tell us about the house and the siding problem to get started.

No cost to submit a request, and no obligation.