Wilsonville’s houses are young, and many of them were built under rules about what their walls could be made of. The median home dates from 1998, nearly half have been built since 2000 (Census ACS 2020-2024), and three parts of the city, Old Town, Villebois and Frog Pond West, have written lists of siding materials that are allowed or banned. Add Charbonneau, the golf-course community south of the river, and many Wilsonville homes answer to a design code or an association as well as to the building code.
If the house is in Old Town, Villebois, Frog Pond West or Charbonneau, say so when you request a siding quote for a Wilsonville address (ZIP code 97070): in those areas a design code or an association sets which siding materials can go on before the work is priced.
From Boones Landing to a planned city
Wilsonville began as Boones Landing. The City’s arts, culture and heritage strategy traces it to Jesse Boone’s land claim and the ferry established there across the Willamette, along with Boones Ferry Road, the forerunner of Interstate 5; the place was formally named Wilsonville in 1880. The freeway came through in 1954, and the ferry, which had made up to 300 trips a day, stopped when the Boone Bridge opened.
The city incorporated in 1968 by the Oregon Blue Book’s date (the heritage strategy gives 1969), and it grew under plans from the start. The City’s Town Center history puts the population at about 1,000 in the early 1970s, when Charbonneau, which the heritage strategy calls Oregon’s first large-scale planned community, was begun in 1970. By 1990 the population was nearly 8,000 and by 2000 over 13,000, and the City’s housing needs analysis records 96 percent growth from 2000 to 2022. The largest recent project stands on the site of Dammasch State Hospital, which closed in 1995; the Villebois Village Master Plan for it was adopted in 2003.
Wilsonville homes by decade
| Built | Wilsonville homes |
|---|---|
| Before 1970 | about 4% |
| 1970s | about 12% |
| 1980s | about 14% |
| 1990s | about 24% |
| 2000s | about 21% |
| 2010 or later | about 25% |
The 2010s alone added nearly a quarter of today’s homes, about as many as the 1990s; in Tigard, Tualatin and Sherwood that decade added far less. The housing is also the least single-family of the four southwest suburbs: detached single-family houses make up about 43 percent of units, attached single-family homes about 9 percent, and buildings of five or more units about 41 percent. Owners live in only about 49 percent of occupied homes.
That changes who decides about siding. In an apartment or condominium building, a townhouse row or a planned development, the exterior is often the association’s or the landlord’s call rather than one owner’s. The City keeps a list of homeowners associations in its planned residential developments, and its building FAQ warns that many subdivisions have standards unique to that subdivision that do not necessarily match the zoning code.
Where the City limits siding materials
Old Town
The Old Town Overlay Zone covers the city’s oldest neighborhood, where the historic houses were built mostly between the 1880s and the 1930s. The Old Town Residential Design Standards prohibit vinyl siding, wood fiber hardboard siding, oriented strand board siding, corrugated or ribbed metal and fiberglass panels as exterior finishes. Remodels, renovations and additions follow the same standards as new construction, except that a structure existing before December 1, 2017 may match its own existing design instead, provided its height and roof pitch stay the same, street-facing architectural elements are kept, and all exterior materials are substantially similar in style and texture to what is there. Single-family remodels are reviewed at staff level, Class I, alongside building plan review. A siding-only job may need no building permit at all, so ask the Planning Division how it will be checked.
Villebois
Outside its Village Center, Villebois is built to an Architectural Pattern Book, and the Village Zone code sets the materials. Its table of permitted materials for single-family detached homes and middle housing lists, for exterior walls, cedar siding and shingles, fiber-cement siding and shingles, cementitious stucco, masonry and concrete, and plywood with battens only away from the primary facade. It caps lap siding at 7 inches to the weather and drop siding at 10, sets a proportion for board and batten, and vinyl is not among the wall materials. The code also says an approved final development plan controls the issuance of building permits and the design of what is built. Villebois was master-planned in 2003, years after the hardboard and OSB settlement windows closed, so the trouble spots to check on its walls are caulk and paint, flashing at windows and roof-to-wall corners, and impact damage.
Frog Pond West
The Frog Pond West standards prohibit the same five finishes as Old Town, vinyl, hardboard and OSB siding among them, on facades facing streets, pedestrian connections, parks and open space. Additions or alterations that add less than 50 percent to a house’s floor area, or that do not face one of those, are exempt.
The irony for older neighborhoods is plain: hardboard and OSB lap, the materials behind the class settlements of the 1980s and 1990s, are the ones these newer codes ban.
Charbonneau
Charbonneau sits south of the Willamette and is part of the City of Wilsonville. It was begun in 1970, and the City lists it among its homeowners associations. The City’s tree code exempts the Charbonneau District from the tree removal permit because the Charbonneau Country Club’s covenants and an approved tree plan meet the City’s requirements, which is one sign of how much the association manages there. Before choosing a new siding material or color in Charbonneau, read the association’s rules as well as the City’s.
What is on Wilsonville’s older walls
About 26 percent of Wilsonville’s homes date from the 1970s and 1980s, and another 24 percent from the 1990s. Siding of those years includes the two products behind the region’s best-known siding lawsuits: pressed-fiber hardboard, largely sold as Masonite, whose settlement covered 1980 through January 1998 installations, and LP Inner-Seal OSB lap, whose Oregon federal class action covered installations before 1996. Neither pays claims today. Houses from those years are the likeliest candidates for hardboard siding failure: swollen lower edges, fasteners sinking into softened board and flaking paint. The 1970s houses, Charbonneau’s first among them, came before those windows; on them, check what the siding actually is before assuming, and watch for T1-11 panel damage or dry rot where boards meet trim.
For a handful of damaged boards, siding repair is the first stop. When failure runs across the house, siding replacement with fiber cement or cedar is permitted under each district list above, and a vinyl re-side is possible only where no district or subdivision rule bans it.
Permits for siding work
Wilsonville’s building FAQ says a permit is required to construct, enlarge, alter, move or demolish a one- or two-family dwelling. The siding exemption itself is the state’s: the Building Codes Division’s homeowner permit page names siding that is not required to be fire resistant among projects without a permit, as ORSC R105.2 does.
- Rated walls: the exemption stops at walls that must resist fire, which in the state code means exterior walls set less than 3 feet off the property line. Townhouse ends and houses built close to a side lot line are where to measure.
- Openings: a window swapped into the same opening is exempt; a new or resized opening needs a permit.
- Hidden damage: the repair exemption ends where work removes wall sections or cuts structural members, which is where rotten framing found at tear-off can lead.
- Electrical: all electrical permitting and inspection inside Wilsonville is done by Clackamas County, so relocating an exterior light or outlet is a county permit.
Two counties, and a ZIP code larger than the city
The Oregon Blue Book lists Wilsonville in both Clackamas and Washington counties, with the bulk of the city on the Clackamas side; the City’s Coffee Creek urban renewal plan places that northwest area partly inside the city limits and partly in unincorporated Washington County. Within city limits, whatever the county, building permits come from the City.
The ZIP code is another matter. Census Bureau geography for 2020 shows the City of Wilsonville taking up about 41 percent of ZIP code area 97070 by land; the remaining 59 percent belongs to no city at all, and nearly all of the ZIP code, about 96 percent, is in Clackamas County. Clackamas County issues all types of building permits in its unincorporated areas, so a rural house with a Wilsonville address follows the county, and none of the district lists above apply to it.
Weather at the Aurora airport
Aurora State Airport, about 4 miles south of Wilsonville, has the closest NOAA weather record long enough for 1991-2020 normals. Those give about 39.5 inches of precipitation a year, more than Portland International’s 37, with about 6.2 inches in December and roughly half an inch apiece in July and August. It also averages about 18 days a year at 90 degrees or hotter and about 39 nights at freezing or below, a few more of each than Portland International’s roughly 15 and 32. Wider temperature swings are one reason vinyl, where it is allowed, has to be hung loose, and why paint and caulk are best applied in the dry, mild weeks of summer.
What to settle before a Wilsonville quote
- District: Old Town, Villebois, Frog Pond, Charbonneau or a subdivision with its own standards? That decides the material list.
- Association: for a condominium, townhouse or planned development, find out who owns the exterior and what the association requires.
- Inside the city? A 97070 address may be rural Clackamas County.
- Lead: about 16 percent of Wilsonville homes predate 1980. Houses from before 1978 fall under Oregon’s lead-safe rules, and scraping or removing 20 square feet or more of their exterior paint is licensed work (the CCB’s Lead-Based Paint Renovation license).
- Trees: outside Charbonneau, removing a tree needs a City Tree Removal Permit; one to three trees in 12 months outside protected areas get the simpler Type A approval.
- Lot lines: side walls closer than 3 feet to the neighbor’s line are permit work.
Wilsonville price references
There is no Wilsonville price in any cost guide. Angi’s Portland-area guides are the closest reference (checked September 27, 2026). They price a typical repair call at $903 to $2,835, and patching existing fiber cement, relevant wherever a newer house already has it, at $3 to $11 for every square foot fixed. A full fiber cement re-side comes to $9 to $16 a square foot in the same Portland guide, and cedar to $6 to $16 a square foot in HomeGuide’s national guide. Tear-off and disposal of the old cladding adds $70 to $200 for each square (100 square feet) nationally. Sources for every figure are on the siding cost page.
Nearby: Tualatin, Sherwood and West Linn.
Last updated